Hikari HTJ-2502C-01 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Basahi Hikari HTJ-2502C-01. Hikari HTJ-2502C-01 17 halaman. 8.5l ultrasonic humidifier

Function Description

1. Plug into a power outlet and the humidifier enters standby mode.

2. Press the "knob" or press the " button"

on the remote control to turn your

humidifier on. The green light comes on. The default humidity level is 6. The

Humidification Mode Indicator

and the Mist Level Indicator

light up. The display

cycles through the current ambient humidity and temperature.

3. Press and hold the "knob" or press the "on/off button"

on the remote control to

enter the standby mode. Display and indicator lights go out.

1. In the power-on state, turn the body "knob" for function switching。

Turn the "knob" clockwise in order: Mist Level - Humidity - Timing - Mist Level

"cycle switching. Select the function you need, press the body "knob" again to enter

the selected function setting mode.

1. Turn the body "knob", the display shows the current mist level, press the body

"knob" to enter the mist setting mode. After entering the setting mode, turn the "knob"

clockwise, the display shows "1-2-3-4-5-6-1" cycle, press the "knob" or do not operate

after 5 seconds, confirm the selection of the corresponding mist level, the icon

lights

up.

2. Press the "Humidification Mode Button"

on the remote control, then press the "+

- "

button can also adjust the mist level.