Major tech MT942 Manuel de l'utilisateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Major tech MT942. Major tech MT942 12 pages. Led light meter
Imprimer la page
LED Light Meter User Manual
screen. make sure that it is Attached to the light sensor.
•
MAX/AVG/MIN
Press "
" button simultaneously Lockup data maximum and average and
minimum value of measure data. Press the "
to disable this feature .
•
LX/FC/CD
Illuminance LUX or Foot candle and luminous intensity measuring unit button.
•
Light Source
Light source selection 1 ~ 9 features, each light source can set correction
parameters , default as 1.000.calibration parameters can be set to 0.001 to 1.999 ,
when the pressure L. S. button for more than 1 second , the digits of 1.000 on
the lower right-hand corner of the screen will be flashing , pressure
you can change the calibration parameters as to 1.002 , the display changes
immediately , set 200.0×1.008= 201.6 , press L .S button for less than 1 second ,
LCD Light source below the LN flashing , pressure
Setup complete press "
• Light Source factor :
•
L1
LED white day light : 0.99 .
•
L2~L9
Default standard light source A : 1.00 .
• Auto-Power Off
Power off automatically after approx.3 to 5 minutes without using the meter.
• Disable Auto Power Off
When the power is on, press the
or recovery automatically shutdown . Automatic shutdown feature is enabled if
"
"shows on the screen.
• MEM ( memory )
Press button for one second to store the data, the LCD screen will display M
and NO . 01~ NO . 99.
6
" for more than 1 second .
L S . .
button for more than 1 second , to cancel
" button for more than 1 seconds
or
change L1 to L9 .
or
,