Major tech MT942 Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Major tech MT942. Major tech MT942 12 pagina's. Led light meter

LED Light Meter User Manual

screen. make sure that it is Attached to the light sensor.

•

MAX/AVG/MIN

Press "

" button simultaneously Lockup data maximum and average and

minimum value of measure data. Press the "

to disable this feature .

•

LX/FC/CD

Illuminance LUX or Foot candle and luminous intensity measuring unit button.

•

Light Source

Light source selection 1 ~ 9 features, each light source can set correction

parameters , default as 1.000.calibration parameters can be set to 0.001 to 1.999 ,

when the pressure L. S. button for more than 1 second , the digits of 1.000 on

the lower right-hand corner of the screen will be flashing , pressure

you can change the calibration parameters as to 1.002 , the display changes

immediately , set 200.0×1.008= 201.6 , press L .S button for less than 1 second ,

LCD Light source below the LN flashing , pressure

Setup complete press "

• Light Source factor :

•

LED white day light : 0.99 .

•

L2~L9

Default standard light source A : 1.00 .

• Auto-Power Off

Power off automatically after approx.3 to 5 minutes without using the meter.

• Disable Auto Power Off

When the power is on, press the

or recovery automatically shutdown . Automatic shutdown feature is enabled if

"shows on the screen.

• MEM ( memory )

Press button for one second to store the data, the LCD screen will display M

and NO . 01~ NO . 99.

" for more than 1 second .

L S . .

button for more than 1 second , to cancel

" button for more than 1 seconds

change L1 to L9 .