Major tech MT942 Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Instrumentos de medição Major tech MT942. Major tech MT942 12 páginas. Led light meter

LED Light Meter User Manual

screen. make sure that it is Attached to the light sensor.

•

MAX/AVG/MIN

Press "

" button simultaneously Lockup data maximum and average and

minimum value of measure data. Press the "

to disable this feature .

•

LX/FC/CD

Illuminance LUX or Foot candle and luminous intensity measuring unit button.

•

Light Source

Light source selection 1 ~ 9 features, each light source can set correction

parameters , default as 1.000.calibration parameters can be set to 0.001 to 1.999 ,

when the pressure L. S. button for more than 1 second , the digits of 1.000 on

the lower right-hand corner of the screen will be flashing , pressure

you can change the calibration parameters as to 1.002 , the display changes

immediately , set 200.0×1.008= 201.6 , press L .S button for less than 1 second ,

LCD Light source below the LN flashing , pressure

Setup complete press "

• Light Source factor :

•

LED white day light : 0.99 .

•

L2~L9

Default standard light source A : 1.00 .

• Auto-Power Off

Power off automatically after approx.3 to 5 minutes without using the meter.

• Disable Auto Power Off

When the power is on, press the

or recovery automatically shutdown . Automatic shutdown feature is enabled if

"shows on the screen.

• MEM ( memory )

Press button for one second to store the data, the LCD screen will display M

and NO . 01~ NO . 99.

" for more than 1 second .

L S . .

button for more than 1 second , to cancel

" button for more than 1 seconds

change L1 to L9 .