Brita 1200 Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Brita 1200. Brita 1200 6 pages. How to flush filter
Également pour Brita 1200 : Manuel (15 pages)

Imprimer la page

5. Make sure the mains water is turned on and flowing through the BRITA water filter

(as it may have been turned off when the equipment was shut down). As soon as you

do this you will start to get water flowing through the grey flush hose into the bucket.

If no water flows, check that the mains water tap to the filter is turned on; if it is not,

once you do turn it on then the water will start to flow through the grey flush hose

into the bucket.

6. If you are still unable to get any water to flush through the grey flush hose, check to

make sure that the blue handles on either side of the PURITY C head are positioned

correctly (see picture below). Once you turn the handles into this position the water

should flow through the grey flush hose as long as you press the flush button down

or slide the mechanism open.

Make sure the blue handles either

side of the head are in this position,

or water will not flush through

the grey flush hose.

7. Flush the required amount of water from the filter;

• C50 – 20 litres

• C150 – 30 litres

• C300 – 60 litres

• C500 – 100 litres

• C1100 – 180 litres

• AC1000 – 10 litres

This could mean you have to fill several buckets and this will take some time to

complete. DO NOT LEAVE THE FILTER UNATTENDED WHILE FLUSHING, as

this will lead to potential flooding.

8. Once you have flushed the required amount of water through the filter, turn off the

flush tap. The filter is now ready to use.