Deco Style PRG500J Manuel - Page 18
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Deco Style PRG500J. Deco Style PRG500J 20 pages. 500w paint sprayer with spray shelter
Imprimer la page
13. FAQ/TROUBLESHOOTING
Symptom
No spray
Paint dripping from
nozzle
Spraying too thick
Irregular spraying
Liquid dripping while
spraying
For further inquiries or issues associated with your sprayer, call our Customer Service on
1300 889 028 or email us at [email protected]
AFTER SALES SUPPORT:
1300 889 028
AUS
Possible Cause
Nozzle clogged
Suction pipe clogged
Flow rate set too low
Suction pipe loosened
Paint container not
tightened
Paint is too thick
Nozzle loosened
Worn nozzle
Paint accumulated on air
cap or nozzle
Paint is too thick
Flow rate set too high
Low pressure in the paint
container
Not enough paint in the
paint container
Dirty filter
Flow rate set too high
Remedy
Clean the nozzle
Clean the suction pipe
Turn the adjusting knob clockwise (+)
to increase the flow rate
Tighten the suction pipe
Tighten the paint container
Check the viscosity of the paint and
dilute.
Tighten the nozzle
Replace the nozzle
Clean the air cap or nozzle with
solvents or water.
Check the viscosity of the paint and
dilute.
Turn the adjusting knob anti-clockwise
(-) to decrease the flow rate
Re-tighten the paint container
Add enough paint
Clean the filter or replace it.
Turn the adjusting knob anti-clockwise
(-) to decrease the flow rate
18
MODEL: PRG500J PRODUCT CODE: 10562 09/2019