Gandy 36T13 Manuel de pièces et d'assemblage - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de pièces et d'assemblage pour {nom_de_la_catégorie} Gandy 36T13. Gandy 36T13 17 pages. 24” & 36” spreaders
Également pour Gandy 36T13 : Manuel de l'opérateur (8 pages), Manuel de l'opérateur (10 pages)
Imprimer la page
Step# 7
(Hitch to Hopper Assembly)
1. Note: Lay something down (piece of cardboard or blanket) to protect hopper from being scratched up.
Lay hopper on its side so the cam gauge is up & pivot the spread plate down out of the way as shown in
Diagram #16.
2. Remove the 5/16" flange nut from the stud above and to the right of the cam gauge as shown
in Diagram #16.
3. Attach the hitch tube with shut-off lever in place to the 5/16" stud & re-use the 5/16" flange nut.
Make sure the end of the shut-off lever goes into the U-notch as shown in Diagram #17.
Do not tighten, leave nut loose.
Diagram #16
Diagram #17
Page 9 of 17
2836-T5