Gandy 36T13 Panduan Suku Cadang & Perakitan - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Suku Cadang & Perakitan untuk Penyebar Gandy 36T13. Gandy 36T13 17 halaman. 24” & 36” spreaders
Juga untuk Gandy 36T13: Panduan Operator (8 halaman), Panduan Operator (10 halaman)
Halaman Cetak
Step# 7
(Hitch to Hopper Assembly)
1. Note: Lay something down (piece of cardboard or blanket) to protect hopper from being scratched up.
Lay hopper on its side so the cam gauge is up & pivot the spread plate down out of the way as shown in
Diagram #16.
2. Remove the 5/16" flange nut from the stud above and to the right of the cam gauge as shown
in Diagram #16.
3. Attach the hitch tube with shut-off lever in place to the 5/16" stud & re-use the 5/16" flange nut.
Make sure the end of the shut-off lever goes into the U-notch as shown in Diagram #17.
Do not tighten, leave nut loose.
Diagram #16
Diagram #17
Page 9 of 17
2836-T5