Gandy 36T13 Руководство по деталям и сборке - Страница 9

Просмотреть онлайн или скачать pdf Руководство по деталям и сборке для Разбрасыватель Gandy 36T13. Gandy 36T13 17 страниц. 24” & 36” spreaders
Также для Gandy 36T13: Руководство по эксплуатации (8 страниц), Руководство по эксплуатации (10 страниц)

Step# 7

(Hitch to Hopper Assembly)

1. Note: Lay something down (piece of cardboard or blanket) to protect hopper from being scratched up.

Lay hopper on its side so the cam gauge is up & pivot the spread plate down out of the way as shown in

Diagram #16.

2. Remove the 5/16" flange nut from the stud above and to the right of the cam gauge as shown

in Diagram #16.

3. Attach the hitch tube with shut-off lever in place to the 5/16" stud & re-use the 5/16" flange nut.

Make sure the end of the shut-off lever goes into the U-notch as shown in Diagram #17.

Do not tighten, leave nut loose.

Diagram #16

Diagram #17

Page 9 of 17

2836-T5