Fujitsu PRIMEQUEST 2000 Series Manuel de configuration - Page 41
Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Fujitsu PRIMEQUEST 2000 Series. Fujitsu PRIMEQUEST 2000 Series 43 pages.
Également pour Fujitsu PRIMEQUEST 2000 Series : Manuel de démarrage (12 pages), Manuel d'installation (29 pages)
Imprimer la page
6. OS Installing
If the configurations of FCoE Boot that are described in previous chapters are properly done, a message
notifies that the connection to the target storage is established is displayed as shown in the figure below.
Legacy BIOS
[
]
During the server restarts up, WWPN and LUN of the target storage are displayed as shown in the figure below.
UEFI
[
]
In Boot Manager front page, select [Boot Manager] and press <Enter> key.
press <Enter> key to launch EFI shell.
If you see "blk0: BlockDevice" as shown in the figure below, the settings are completed.
Using SVIM (SeverView Install Manager), install OS of purpose.
Copyright 2016 FUJITSU LIMITED
Figure 6-1
Figure 6-2
41
Then select [EFI Internal Shell] and
CA92344-0966-01