Fujitsu PRIMEQUEST 2000 Series 구성 매뉴얼 - 페이지 41

{카테고리_이름} Fujitsu PRIMEQUEST 2000 Series에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu PRIMEQUEST 2000 Series 43 페이지.
Fujitsu PRIMEQUEST 2000 Series에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (12 페이지), 설치 매뉴얼 (29 페이지)

페이지 인쇄
Fujitsu PRIMEQUEST 2000 Series 구성 매뉴얼

6. OS Installing

If the configurations of FCoE Boot that are described in previous chapters are properly done, a message
notifies that the connection to the target storage is established is displayed as shown in the figure below.
Legacy BIOS
[
]
During the server restarts up, WWPN and LUN of the target storage are displayed as shown in the figure below.
UEFI
[
]
In Boot Manager front page, select [Boot Manager] and press <Enter> key.
press <Enter> key to launch EFI shell.
If you see "blk0: BlockDevice" as shown in the figure below, the settings are completed.
Using SVIM (SeverView Install Manager), install OS of purpose.
Copyright 2016 FUJITSU LIMITED
Figure 6-1
Figure 6-2
41
Then select [EFI Internal Shell] and
CA92344-0966-01