Fujitsu PRIMEQUEST 2000 Series Configuration Manual - Page 41
Browse online or download pdf Configuration Manual for Server Fujitsu PRIMEQUEST 2000 Series. Fujitsu PRIMEQUEST 2000 Series 43 pages.
Also for Fujitsu PRIMEQUEST 2000 Series: Getting Started Manual (12 pages), Installation Manual (29 pages)
Print Page
6. OS Installing
If the configurations of FCoE Boot that are described in previous chapters are properly done, a message
notifies that the connection to the target storage is established is displayed as shown in the figure below.
Legacy BIOS
[
]
During the server restarts up, WWPN and LUN of the target storage are displayed as shown in the figure below.
UEFI
[
]
In Boot Manager front page, select [Boot Manager] and press <Enter> key.
press <Enter> key to launch EFI shell.
If you see "blk0: BlockDevice" as shown in the figure below, the settings are completed.
Using SVIM (SeverView Install Manager), install OS of purpose.
Copyright 2016 FUJITSU LIMITED
Figure 6-1
Figure 6-2
41
Then select [EFI Internal Shell] and
CA92344-0966-01