Fujitsu PRIMERGY Econel 200 S2 Manuel de supplément de service - Page 23
Parcourez en ligne ou téléchargez le pdf Manuel de supplément de service pour {nom_de_la_catégorie} Fujitsu PRIMERGY Econel 200 S2. Fujitsu PRIMERGY Econel 200 S2 39 pages.
Imprimer la page
Replacement routines
4.3
Replacing the USB cable (front side)
Part number: A3C40082391
Ê Remove the side cover as described in section "Opening the server" on
page 17.
Ê Remove the front cover as described in section "Removing the front cover"
on page 19.
Figure 6: Removing the screw of the holder
Ê Loosen the screw of the holder.
Ê Disconnect the plug of the USB cable from the system board (connector
USB 3/4, see system board foil D2530).
Ê Release the USB cable from the cable clamps, pull it through the recesses
of the chassis.
Econel 200 S2
Replacing the USB cable (front side)
Service Supplement
23