Fujitsu PRIMERGY Econel 200 S2 Panduan Suplemen Servis - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Suplemen Servis untuk Server Fujitsu PRIMERGY Econel 200 S2. Fujitsu PRIMERGY Econel 200 S2 39 halaman.

Replacement routines

4.3

Replacing the USB cable (front side)

Part number: A3C40082391

Ê Remove the side cover as described in section "Opening the server" on

page 17.

Ê Remove the front cover as described in section "Removing the front cover"

on page 19.

Figure 6: Removing the screw of the holder

Ê Loosen the screw of the holder.

Ê Disconnect the plug of the USB cable from the system board (connector

USB 3/4, see system board foil D2530).

Ê Release the USB cable from the cable clamps, pull it through the recesses

of the chassis.

Econel 200 S2

Replacing the USB cable (front side)

Service Supplement