Fujitsu PRIMERGY Econel 200 S2 Service Supplement Manual - Page 23

Browse online or download pdf Service Supplement Manual for Server Fujitsu PRIMERGY Econel 200 S2. Fujitsu PRIMERGY Econel 200 S2 39 pages.

Print Page
Fujitsu PRIMERGY Econel 200 S2 Service Supplement Manual
Replacement routines
4.3

Replacing the USB cable (front side)

Part number: A3C40082391
Ê Remove the side cover as described in section "Opening the server" on
page 17.
Ê Remove the front cover as described in section "Removing the front cover"
on page 19.
Figure 6: Removing the screw of the holder
Ê Loosen the screw of the holder.
Ê Disconnect the plug of the USB cable from the system board (connector
USB 3/4, see system board foil D2530).
Ê Release the USB cable from the cable clamps, pull it through the recesses
of the chassis.
Econel 200 S2
Replacing the USB cable (front side)
Service Supplement
23