Fujitsu Eternus DX90 S2 Manuel de configuration - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Fujitsu Eternus DX90 S2. Fujitsu Eternus DX90 S2 38 pages. Server connection. (fibre channel) for aix
Également pour Fujitsu Eternus DX90 S2 : Manuel de l'utilisateur (35 pages), Manuel de l'utilisateur (42 pages), Manuel (18 pages), Instal Setup (20 pages), Manuel de configuration Connexion au serveur (13 pages), Installation du matériel (23 pages), Manuel de configuration (28 pages), Manuel de configuration (15 pages)

Imprimer la page
Fujitsu Eternus DX90 S2 Manuel de configuration
Chapter 3
Notes
3.10

Virtual I/O Server (VIOS) Notes

3.10
Virtual I/O Server (VIOS) Notes
Perform the settings described in this manual only for a VIOS.
•
When performing VIOS settings or installing software, the root privilege for the VIOS environment is re-
quired.
To use a VIOS, ETERNUS Multipath Driver 2 (AIX) or FJSVmpio is required. Install ETERNUS Multipath Driver 2
•
(AIX) or FJSVmpio in the VIOS.
Configuring LVM on the VIOS is not supported.
•
3.11

Oracle RAC Notes

Set the CSS miscount parameter to a value of 60 or higher.
•
Set "fc_err_recov", an "fscsi" attribute, to "fast_fail".
•
3.12

Path Addition Notes

Added paths may not be automatically recognized if the OS is not rebooted after adding the paths. In that
case, execute the following command.
#cfgmgr
In addition, if Veritas Volume Manager (VxVM) is used, execute the following command.
#vxdctl enable
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX
15
Copyright 2018 FUJITSU LIMITED
P3AM-3782-23ENZ0