Fujitsu Eternus DX90 S2 Configuration Manual - Page 15

Browse online or download pdf Configuration Manual for Storage Fujitsu Eternus DX90 S2. Fujitsu Eternus DX90 S2 38 pages. Server connection. (fibre channel) for aix
Also for Fujitsu Eternus DX90 S2: User Manual (35 pages), User Manual (42 pages), Manual (18 pages), Instal Setup (20 pages), Configuration Manual Server Connection (13 pages), Hardware Installation (23 pages), Configuration Manual (28 pages), Configuration Manual (15 pages)

Print Page

Chapter 3

Notes

3.10

Virtual I/O Server (VIOS) Notes

3.10

Virtual I/O Server (VIOS) Notes

Perform the settings described in this manual only for a VIOS.

•

When performing VIOS settings or installing software, the root privilege for the VIOS environment is re-

quired.

To use a VIOS, ETERNUS Multipath Driver 2 (AIX) or FJSVmpio is required. Install ETERNUS Multipath Driver 2

•

(AIX) or FJSVmpio in the VIOS.

Configuring LVM on the VIOS is not supported.

•

3.11

Set the CSS miscount parameter to a value of 60 or higher.

•

Set "fc_err_recov", an "fscsi" attribute, to "fast_fail".

•

3.12

Added paths may not be automatically recognized if the OS is not rebooted after adding the paths. In that

case, execute the following command.

#cfgmgr

In addition, if Veritas Volume Manager (VxVM) is used, execute the following command.

#vxdctl enable

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX

P3AM-3782-23ENZ0