AEG 155 D Manuel d'installation et d'utilisation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} AEG 155 D. AEG 155 D 22 pages. Aeg ventilation hood user manual
Également pour AEG 155 D : Manuel d'installation et d'utilisation (22 pages)

Imprimer la page

Introduction

The hood is supplied as an extractor unit and can also be used

with a filtering function by fitting activated carbon filters (special

accessory).

The unit features two outlet holes, one of which A is located on the

Extractor

top of the unit while the other B is located on the rear.

version

To connect up the hose, you should first fit the bayonet-mounting

flange C on the outlet required (if using the top outlet, fix the flange

in place using the screw supplied as shown in Fig. 1.

Close off the unused hole using the bayonet-fitting caps D.

If using the rear hole, open the air passage by removing the

partition (E — Fig. 2)

Move the lever F to position A — Fig. 3.

When connecting up the hood using a telescopic wall pipe,

you should preferably using the uninflammable outlet hose

No. E 610 899 007 (120 mm 0) from our range of special

accessories.