AEG 155 D Panduan Petunjuk Pemasangan dan Pengoperasian - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pemasangan dan Pengoperasian untuk Kap Ventilasi AEG 155 D. AEG 155 D 22 halaman. Aeg ventilation hood user manual
Juga untuk AEG 155 D: Panduan Petunjuk Pemasangan dan Pengoperasian (22 halaman)

Halaman Cetak

Introduction

The hood is supplied as an extractor unit and can also be used

with a filtering function by fitting activated carbon filters (special

accessory).

The unit features two outlet holes, one of which A is located on the

Extractor

top of the unit while the other B is located on the rear.

version

To connect up the hose, you should first fit the bayonet-mounting

flange C on the outlet required (if using the top outlet, fix the flange

in place using the screw supplied as shown in Fig. 1.

Close off the unused hole using the bayonet-fitting caps D.

If using the rear hole, open the air passage by removing the

partition (E — Fig. 2)

Move the lever F to position A — Fig. 3.

When connecting up the hood using a telescopic wall pipe,

you should preferably using the uninflammable outlet hose

No. E 610 899 007 (120 mm 0) from our range of special

accessories.