AEG 155 D 설치 및 운영 지침 매뉴얼 - 페이지 3

{카테고리_이름} AEG 155 D에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 155 D 22 페이지. Aeg ventilation hood user manual
AEG 155 D에 대해서도 마찬가지입니다: 설치 및 운영 지침 매뉴얼 (22 페이지)

페이지 인쇄

Introduction

The hood is supplied as an extractor unit and can also be used

with a filtering function by fitting activated carbon filters (special

accessory).

The unit features two outlet holes, one of which A is located on the

Extractor

top of the unit while the other B is located on the rear.

version

To connect up the hose, you should first fit the bayonet-mounting

flange C on the outlet required (if using the top outlet, fix the flange

in place using the screw supplied as shown in Fig. 1.

Close off the unused hole using the bayonet-fitting caps D.

If using the rear hole, open the air passage by removing the

partition (E — Fig. 2)

Move the lever F to position A — Fig. 3.

When connecting up the hood using a telescopic wall pipe,

you should preferably using the uninflammable outlet hose

No. E 610 899 007 (120 mm 0) from our range of special

accessories.