Kohler Triton K-T7019 Manuel d'installation - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Kohler Triton K-T7019. Kohler Triton K-T7019 8 pages. Bath/deck-mount faucet
Également pour Kohler Triton K-T7019 : Manuel d'installation (24 pages), Manuel du propriétaire (21 pages)
Imprimer la page
Install Spout Supply Tube
Spout
Supply
Tube
Sleeve
1. Install Spout Supply Tube
Remove the plaster guard from the spout supply tube.
-
Cut the supply tube so 1 1/4" (3.2cm) remains above the rim,
-
finished deck or tile.
Ensure that all burrs are removed from the spout supply tube to
-
prevent damage to the O ring seal inside the sleeve.
For tile-covered rough-deck installation only
Slide the brass washer, furnished with the spout, onto the spout
-
supply tube with the flat side facing forward.
NOTE: The washer is not needed for rim/finished deck installations.
Install Sleeve
Loosen the setscrews in the sleeve.
-
Use a twisting motion to install the sleeve onto the spout supply line
-
until it contacts the washer.
Align the sleeve so the setscrews are not facing directly forward or
-
backward. Tighten the setscrews.
Kohler Co.
For Tile-Covered Deck
Installation Only
Brass Washer
Spout Supply
1-1/4" (3.2cm)
Tube
Tile
Finish
Rough Deck
Install Sleeve
3
Finished
Deck
Rough
Deck
Screws
A
1011303-2-