Kohler Triton K-T7019 설치 매뉴얼 - 페이지 3

{카테고리_이름} Kohler Triton K-T7019에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler Triton K-T7019 8 페이지. Bath/deck-mount faucet
Kohler Triton K-T7019에 대해서도 마찬가지입니다: 설치 매뉴얼 (24 페이지), 주택 소유자 매뉴얼 (21 페이지)

페이지 인쇄

Install Spout Supply Tube

Spout

Supply

Tube

Sleeve

1. Install Spout Supply Tube

Remove the plaster guard from the spout supply tube.

Cut the supply tube so 1 1/4" (3.2cm) remains above the rim,

finished deck or tile.

Ensure that all burrs are removed from the spout supply tube to

prevent damage to the O ring seal inside the sleeve.

For tile-covered rough-deck installation only

Slide the brass washer, furnished with the spout, onto the spout

supply tube with the flat side facing forward.

NOTE: The washer is not needed for rim/finished deck installations.

Install Sleeve

Loosen the setscrews in the sleeve.

Use a twisting motion to install the sleeve onto the spout supply line

until it contacts the washer.

Align the sleeve so the setscrews are not facing directly forward or

backward. Tighten the setscrews.

Kohler Co.

For Tile-Covered Deck

Installation Only

Brass Washer

Spout Supply

1-1/4" (3.2cm)

Tube

Tile

Finish

Rough Deck

Install Sleeve

Finished

Deck

Rough

Deck

Screws

1011303-2-