Kohler Triton K-T7019 Manuale di installazione - Pagina 3

Sfoglia online o scarica il pdf Manuale di installazione per Apparecchiature per il bagno Kohler Triton K-T7019. Kohler Triton K-T7019 8. Bath/deck-mount faucet
Anche per Kohler Triton K-T7019: Manuale di installazione (24 pagine), Manuale del proprietario di casa (21 pagine)

Kohler Triton K-T7019 Manuale di installazione
Install Spout Supply Tube
Spout
Supply
Tube
Sleeve
1. Install Spout Supply Tube
Remove the plaster guard from the spout supply tube.
-
Cut the supply tube so 1 1/4" (3.2cm) remains above the rim,
-
finished deck or tile.
Ensure that all burrs are removed from the spout supply tube to
-
prevent damage to the O ring seal inside the sleeve.
For tile-covered rough-deck installation only
Slide the brass washer, furnished with the spout, onto the spout
-
supply tube with the flat side facing forward.
NOTE: The washer is not needed for rim/finished deck installations.
Install Sleeve
Loosen the setscrews in the sleeve.
-
Use a twisting motion to install the sleeve onto the spout supply line
-
until it contacts the washer.
Align the sleeve so the setscrews are not facing directly forward or
-
backward. Tighten the setscrews.
Kohler Co.
For Tile-Covered Deck
Installation Only
Brass Washer
Spout Supply
1-1/4" (3.2cm)
Tube
Tile
Finish
Rough Deck
Install Sleeve
3
Finished
Deck
Rough
Deck
Screws
A
1011303-2-