Dell PowerEdge 2800 Conversion Manualline - Page 23

Parcourez en ligne ou téléchargez le pdf Conversion Manualline pour {nom_de_la_catégorie} Dell PowerEdge 2800. Dell PowerEdge 2800 36 pages. Poweredge 2800 server
Également pour Dell PowerEdge 2800 : Information Update (24 pages), Manuel d'installation (22 pages), Manuel (44 pages), Installation du matériel (14 pages), Référence rapide (2 pages), Spécifications (2 pages)

Y1001bk0.book Page 21 Thursday, July 8, 2004 4:32 PM

Removing the Cable-Management Arm

Shut down and turn off the system you are removing and all peripherals attached to this

system.

At the back of the rack cabinet, disconnect and remove the AC power cable and all cables

connected to the back of the system and secured to the cable-management arm with the

arm's Velcro straps.

Loosen the two captive thumbscrews securing the cable-management arm retainer to the

vertical rack rails. See Figure 1-11.

Disconnect the inner tab of the cable-management arm from the cable tray.

Disconnect the outer tab of the cable-management arm from the cable tray.

Pull the cable-management arm from the cable tray.

Remove the two captive thumbscrews that secure the cable tray to the system. See

Figure 1-11.

Remove the cable tray.

Figure 1-11. Removing the Cable-Management Arm

captive thumbscrews (2)

latch on cable tray

cable-management

arm

tabs

back of

system

Tower-to-Rack and Rack-to-Tower Conversion Guide

back of rack

captive

thumbscrews

(2)

Velcro strap

formed metal tabs