- ページ 23

サーバー Dell PowerEdge 2800のPDF コンバージョン・マニュアリンをオンラインで閲覧またはダウンロードできます。Dell PowerEdge 2800 36 ページ。 Poweredge 2800 server
Dell PowerEdge 2800 にも：情報更新 (24 ページ), インストレーション・マニュアル (22 ページ), マニュアル (44 ページ), ハードウェアのインストール (14 ページ), クイック・リファレンス (2 ページ), 仕様 (2 ページ)

Y1001bk0.book Page 21 Thursday, July 8, 2004 4:32 PM

Removing the Cable-Management Arm

Shut down and turn off the system you are removing and all peripherals attached to this

system.

At the back of the rack cabinet, disconnect and remove the AC power cable and all cables

connected to the back of the system and secured to the cable-management arm with the

arm's Velcro straps.

Loosen the two captive thumbscrews securing the cable-management arm retainer to the

vertical rack rails. See Figure 1-11.

Disconnect the inner tab of the cable-management arm from the cable tray.

Disconnect the outer tab of the cable-management arm from the cable tray.

Pull the cable-management arm from the cable tray.

Remove the two captive thumbscrews that secure the cable tray to the system. See

Figure 1-11.

Remove the cable tray.

Figure 1-11. Removing the Cable-Management Arm

captive thumbscrews (2)

latch on cable tray

cable-management

arm

tabs

back of

system

Tower-to-Rack and Rack-to-Tower Conversion Guide

back of rack

captive

thumbscrews

(2)

Velcro strap

formed metal tabs