Dell PowerEdge 2800 Conversion Manualline - Page 29
Parcourez en ligne ou téléchargez le pdf Conversion Manualline pour {nom_de_la_catégorie} Dell PowerEdge 2800. Dell PowerEdge 2800 36 pages. Poweredge 2800 server
Également pour Dell PowerEdge 2800 : Information Update (24 pages), Manuel d'installation (22 pages), Manuel (44 pages), Installation du matériel (14 pages), Référence rapide (2 pages), Spécifications (2 pages)
Imprimer la page
Y1001bk0.book Page 27 Thursday, July 8, 2004 4:32 PM
Figure 1-16. Drive Tray in the Maintenance Position
drive tray
release lever
Remove the control panel assembly.
Orient the system as shown in Figure 1-17.
a
Disconnect the control panel cable from the SCSI backplane.
b
Inside the drive tray, open the control panel cable clamp. See Figure 1-17.
c
Using a #2 Phillips screwdriver, remove the two screws that secure the control panel
d
assembly to the rack front panel.
Slide the control panel assembly back away from the front panel and remove the assembly
e
from the chassis.
NOTE:
While removing the control panel assembly, be careful not to damage the interface cable.
captive screw
Tower-to-Rack and Rack-to-Tower Conversion Guide
27