Dell PowerEdge 2800 수동 변환 - 페이지 29
{카테고리_이름} Dell PowerEdge 2800에 대한 수동 변환을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 2800 36 페이지. Poweredge 2800 server
Dell PowerEdge 2800에 대해서도 마찬가지입니다: 정보 업데이트 (24 페이지), 설치 매뉴얼 (22 페이지), 매뉴얼 (44 페이지), 하드웨어 설치 (14 페이지), 빠른 참조 (2 페이지), 사양 (2 페이지)
페이지 인쇄
Y1001bk0.book Page 27 Thursday, July 8, 2004 4:32 PM
Figure 1-16. Drive Tray in the Maintenance Position
drive tray
release lever
Remove the control panel assembly.
Orient the system as shown in Figure 1-17.
a
Disconnect the control panel cable from the SCSI backplane.
b
Inside the drive tray, open the control panel cable clamp. See Figure 1-17.
c
Using a #2 Phillips screwdriver, remove the two screws that secure the control panel
d
assembly to the rack front panel.
Slide the control panel assembly back away from the front panel and remove the assembly
e
from the chassis.
NOTE:
While removing the control panel assembly, be careful not to damage the interface cable.
captive screw
Tower-to-Rack and Rack-to-Tower Conversion Guide
27