Dell PowerEdge 2800 수동 변환 - 페이지 30
{카테고리_이름} Dell PowerEdge 2800에 대한 수동 변환을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 2800 36 페이지. Poweredge 2800 server
Dell PowerEdge 2800에 대해서도 마찬가지입니다: 정보 업데이트 (24 페이지), 설치 매뉴얼 (22 페이지), 매뉴얼 (44 페이지), 하드웨어 설치 (14 페이지), 빠른 참조 (2 페이지), 사양 (2 페이지)
페이지 인쇄
Y1001bk0.book Page 28 Thursday, July 8, 2004 4:32 PM
Figure 1-17. Removing the Rack Control Panel Assembly
Using a T-10 Torx driver, remove the 22 screws that secure the rack front panel to the drive
tray. See Figure 1-17
Installing the Tower Front Panel and Control Panel Assembly
Install the tower front panel. See Figure 1-17.
Orient the system as shown in Figure 1-17.
a
Using a T-10 Torx driver, install the 22 screws (that came in your kit) that secure the
b
tower front panel to the drive tray.
NOTE:
rack systems. Only the carrier is different. When converting your rack system to a tower system, you must
remove the LCD board and the I/O board from the control panel assembly that you removed in step 2 of
"Removing the Control Panel Assembly and Rack Front Panel."
28
Tower-to-Rack and Rack-to-Tower Conversion Guide
control panel
cable clamp
The control panel assembly's LCD board and the I/O board are the same for both the tower and
control panel
assembly
screws (2)
T-10 Torx
screws (22)