Dell PowerEdge 2800 Konwersja Manualline - Strona 30

Przeglądaj online lub pobierz pdf Konwersja Manualline dla Serwer Dell PowerEdge 2800. Dell PowerEdge 2800 36 stron. Poweredge 2800 server
Również dla Dell PowerEdge 2800: Aktualizacja informacji (24 strony), Instrukcja instalacji (22 strony), Podręcznik (44 strony), Instalacja sprzętu (14 strony), Skrócona instrukcja obsługi (2 strony), Specyfikacje (2 strony)

Y1001bk0.book Page 28 Thursday, July 8, 2004 4:32 PM

Figure 1-17. Removing the Rack Control Panel Assembly

Using a T-10 Torx driver, remove the 22 screws that secure the rack front panel to the drive

tray. See Figure 1-17

Installing the Tower Front Panel and Control Panel Assembly

Install the tower front panel. See Figure 1-17.

Orient the system as shown in Figure 1-17.

Using a T-10 Torx driver, install the 22 screws (that came in your kit) that secure the

tower front panel to the drive tray.

NOTE:

rack systems. Only the carrier is different. When converting your rack system to a tower system, you must

remove the LCD board and the I/O board from the control panel assembly that you removed in step 2 of

"Removing the Control Panel Assembly and Rack Front Panel."

Tower-to-Rack and Rack-to-Tower Conversion Guide

control panel

cable clamp

The control panel assembly's LCD board and the I/O board are the same for both the tower and

control panel

assembly

screws (2)

T-10 Torx

screws (22)