Dell PowerEdge 2800 Conversion Manualline - Page 30
Parcourez en ligne ou téléchargez le pdf Conversion Manualline pour {nom_de_la_catégorie} Dell PowerEdge 2800. Dell PowerEdge 2800 36 pages. Poweredge 2800 server
Également pour Dell PowerEdge 2800 : Information Update (24 pages), Manuel d'installation (22 pages), Manuel (44 pages), Installation du matériel (14 pages), Référence rapide (2 pages), Spécifications (2 pages)
Imprimer la page
Y1001bk0.book Page 28 Thursday, July 8, 2004 4:32 PM
Figure 1-17. Removing the Rack Control Panel Assembly
Using a T-10 Torx driver, remove the 22 screws that secure the rack front panel to the drive
tray. See Figure 1-17
Installing the Tower Front Panel and Control Panel Assembly
Install the tower front panel. See Figure 1-17.
Orient the system as shown in Figure 1-17.
a
Using a T-10 Torx driver, install the 22 screws (that came in your kit) that secure the
b
tower front panel to the drive tray.
NOTE:
rack systems. Only the carrier is different. When converting your rack system to a tower system, you must
remove the LCD board and the I/O board from the control panel assembly that you removed in step 2 of
"Removing the Control Panel Assembly and Rack Front Panel."
28
Tower-to-Rack and Rack-to-Tower Conversion Guide
control panel
cable clamp
The control panel assembly's LCD board and the I/O board are the same for both the tower and
control panel
assembly
screws (2)
T-10 Torx
screws (22)