Dell PowerEdge 2800 Conversão Manualline - Página 30

Procurar online ou descarregar pdf Conversão Manualline para Servidor Dell PowerEdge 2800. Dell PowerEdge 2800 36 páginas. Poweredge 2800 server
Também para Dell PowerEdge 2800: Atualização da informação (24 páginas), Manual de instalação (22 páginas), Manual (44 páginas), Instalação de hardware (14 páginas), Referência rápida (2 páginas), Especificações (2 páginas)

Y1001bk0.book Page 28 Thursday, July 8, 2004 4:32 PM

Figure 1-17. Removing the Rack Control Panel Assembly

Using a T-10 Torx driver, remove the 22 screws that secure the rack front panel to the drive

tray. See Figure 1-17

Installing the Tower Front Panel and Control Panel Assembly

Install the tower front panel. See Figure 1-17.

Orient the system as shown in Figure 1-17.

Using a T-10 Torx driver, install the 22 screws (that came in your kit) that secure the

tower front panel to the drive tray.

NOTE:

rack systems. Only the carrier is different. When converting your rack system to a tower system, you must

remove the LCD board and the I/O board from the control panel assembly that you removed in step 2 of

"Removing the Control Panel Assembly and Rack Front Panel."

Tower-to-Rack and Rack-to-Tower Conversion Guide

control panel

cable clamp

The control panel assembly's LCD board and the I/O board are the same for both the tower and

control panel

assembly

screws (2)

T-10 Torx

screws (22)