Dell PowerEdge 2800 Omzetting Manuallijn - Pagina 30

Blader online of download pdf Omzetting Manuallijn voor {categorie_naam} Dell PowerEdge 2800. Dell PowerEdge 2800 36 pagina's. Poweredge 2800 server
Ook voor Dell PowerEdge 2800: Informatie-update (24 pagina's), Installatiehandleiding (22 pagina's), Handmatig (44 pagina's), Hardware-installatie (14 pagina's), Snelle referentie (2 pagina's), Specificaties (2 pagina's)

Y1001bk0.book Page 28 Thursday, July 8, 2004 4:32 PM

Figure 1-17. Removing the Rack Control Panel Assembly

Using a T-10 Torx driver, remove the 22 screws that secure the rack front panel to the drive

tray. See Figure 1-17

Installing the Tower Front Panel and Control Panel Assembly

Install the tower front panel. See Figure 1-17.

Orient the system as shown in Figure 1-17.

Using a T-10 Torx driver, install the 22 screws (that came in your kit) that secure the

tower front panel to the drive tray.

NOTE:

rack systems. Only the carrier is different. When converting your rack system to a tower system, you must

remove the LCD board and the I/O board from the control panel assembly that you removed in step 2 of

"Removing the Control Panel Assembly and Rack Front Panel."

Tower-to-Rack and Rack-to-Tower Conversion Guide

control panel

cable clamp

The control panel assembly's LCD board and the I/O board are the same for both the tower and

control panel

assembly

screws (2)

T-10 Torx

screws (22)