Dell UltraSharp UP3218K Manuel de démontage - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de démontage pour {nom_de_la_catégorie} Dell UltraSharp UP3218K. Dell UltraSharp UP3218K 6 pages.
Également pour Dell UltraSharp UP3218K : Manuel de l'utilisateur (50 pages), Manuel de démarrage rapide (2 pages), Manuel de démarrage rapide (2 pages), Manuel d'entretien (14 pages)

DELL UP3218K

Remove the middle iron bezel. Tear off the mylar tape

S11

for releasing the function key cable from the hooks of

the middle iron bezel.

Lift up the bracket chassis module and put it on a

S12

protector

cushion.

Use a

Philips-head screwdriver to remove

for locking the AC power outlet, to remove 2 screws

for unlocking the stand LED board. Remove the

S13

Stand LED board by disconnecting the cable.

(No.1~2 screw size=M3x4.5, Torque=7~8kgfxcm,

No.3~4 screw size=M3x10, Torque=6~8kgfxcm)

2 screws

Turn over the bracket chassis. Use a Philips-head

screwdriver to remove 4 screws for unlocking the

interface board and LED driver board. Disconnect

S14

the cables of the interface board and LED driver

board away from the power board, then remove the

two board from the hooks of the bracket.

(No.8~11 screw size=M3x7.5, Torque=7~8kgfxcm)

Remove the Mylar from the hooks of the bracket

S15

chassis module.

Use a Philips-head screwdriver to remove 7 screws for

unlocking the power board and AC board, then remove

the two boards from the hooks of the bracket chassis.

S16

isconnect all of the cables.

(No.1 screw size=M4x8, Torque=7~8kgfxcm;

No.2~7 screw size=M3x7.5, Torque=7~8kgfxcm;