Dell UltraSharp UP3218K 분해 매뉴얼 - 페이지 3

{카테고리_이름} Dell UltraSharp UP3218K에 대한 분해 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell UltraSharp UP3218K 6 페이지.
Dell UltraSharp UP3218K에 대해서도 마찬가지입니다: 사용자 설명서 (50 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 서비스 매뉴얼 (14 페이지)

페이지 인쇄

DELL UP3218K

Remove the middle iron bezel. Tear off the mylar tape

S11

for releasing the function key cable from the hooks of

the middle iron bezel.

Lift up the bracket chassis module and put it on a

S12

protector

cushion.

Use a

Philips-head screwdriver to remove

for locking the AC power outlet, to remove 2 screws

for unlocking the stand LED board. Remove the

S13

Stand LED board by disconnecting the cable.

(No.1~2 screw size=M3x4.5, Torque=7~8kgfxcm,

No.3~4 screw size=M3x10, Torque=6~8kgfxcm)

2 screws

Turn over the bracket chassis. Use a Philips-head

screwdriver to remove 4 screws for unlocking the

interface board and LED driver board. Disconnect

S14

the cables of the interface board and LED driver

board away from the power board, then remove the

two board from the hooks of the bracket.

(No.8~11 screw size=M3x7.5, Torque=7~8kgfxcm)

Remove the Mylar from the hooks of the bracket

S15

chassis module.

Use a Philips-head screwdriver to remove 7 screws for

unlocking the power board and AC board, then remove

the two boards from the hooks of the bracket chassis.

S16

isconnect all of the cables.

(No.1 screw size=M4x8, Torque=7~8kgfxcm;

No.2~7 screw size=M3x7.5, Torque=7~8kgfxcm;