Dell UltraSharp UP3218K Manual Pembongkaran - Halaman 3
Jelajahi secara online atau unduh pdf Manual Pembongkaran untuk Monitor Dell UltraSharp UP3218K. Dell UltraSharp UP3218K 6 halaman.
Juga untuk Dell UltraSharp UP3218K: Panduan Pengguna (50 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Servis (14 halaman)
Halaman Cetak
3
DELL UP3218K
Remove the middle iron bezel. Tear off the mylar tape
S11
for releasing the function key cable from the hooks of
the middle iron bezel.
Lift up the bracket chassis module and put it on a
S12
protector
cushion.
Use a
Philips-head screwdriver to remove
for locking the AC power outlet, to remove 2 screws
for unlocking the stand LED board. Remove the
S13
Stand LED board by disconnecting the cable.
(No.1~2 screw size=M3x4.5, Torque=7~8kgfxcm,
No.3~4 screw size=M3x10, Torque=6~8kgfxcm)
4
2 screws
13
1
2
3
Turn over the bracket chassis. Use a Philips-head
screwdriver to remove 4 screws for unlocking the
interface board and LED driver board. Disconnect
S14
the cables of the interface board and LED driver
board away from the power board, then remove the
two board from the hooks of the bracket.
(No.8~11 screw size=M3x7.5, Torque=7~8kgfxcm)
8
9
10
Remove the Mylar from the hooks of the bracket
S15
chassis module.
Use a Philips-head screwdriver to remove 7 screws for
unlocking the power board and AC board, then remove
the two boards from the hooks of the bracket chassis.
S16
D
isconnect all of the cables.
(No.1 screw size=M4x8, Torque=7~8kgfxcm;
No.2~7 screw size=M3x7.5, Torque=7~8kgfxcm;
11
2
4
5
3
6
1
7