Dell PowerVault MD3600f Series Manuel de déploiement - Page 22

Parcourez en ligne ou téléchargez le pdf Manuel de déploiement pour {nom_de_la_catégorie} Dell PowerVault MD3600f Series. Dell PowerVault MD3600f Series 36 pages. Remote replication
Également pour Dell PowerVault MD3600f Series : Manuel de configuration (22 pages), Manuel d'installation (18 pages), Matrice de soutien (17 pages), Manuel fonctionnel (15 pages)

Dell PowerVault MD3600f Series Manuel de déploiement

Verifying Storage Array Discovery

The Automatic Discovery option automatically discovers both in-band and out-
of-band arrays and adds the storage arrays to the management domain. If the out-
of-band or in-band connections shown on the summary page are not accurate,
complete the following steps. For more information, see the online help.
1 Check the hardware and connections for possible problems. For specific
procedures on troubleshooting interface problems, see the Owner's Manual
at support.dell.com/manuals.
2 Verify that the array is on the local subnetwork. If it is not, click the new
link to manually add it.
3 Verify that the status of each storage array is Optimal. If any array shows
an Unresponsive status, complete one of the following steps:
To remove the array from the management domain, highlight the
a
array and then click Remove link.
To add an array, click New link.
b
In Linux, click the Manual button and click OK.
4 If the array still shows an Unresponsive status, contact Dell.

Initial Setup Tasks

1 The name of the first storage array found appears in the Devices tab of the
EMW. To see a list of all storage arrays found on the local network, expand
the discovered storage arrays tab in the device pane of the EMW.
2 The default name for a newly installed MD3600f series storage array is
Unnamed. If another name appears in MDSM, click the down arrow next
to the name and click Unnamed in the drop-down list.
3 Double-click on the discovered array to launch the array management
window and make changes to the configuration of the array.
4 Click Perform Initial Setup Tasks to see an outline and links to the
remaining post-installation tasks. The array is now ready to be configured.
See the Owner's Manual for information about each task and to perform
the necessary configuration steps. Table 4-1 lists the recommended
configuration steps that can be accomplished using the Owner's Manual.
22
Post Installation Tasks