Dell PowerVault MD3600f Series Руководство по развертыванию - Страница 22

Просмотреть онлайн или скачать pdf Руководство по развертыванию для Хранение Dell PowerVault MD3600f Series. Dell PowerVault MD3600f Series 36 страниц. Remote replication
Также для Dell PowerVault MD3600f Series: Руководство по конфигурации (22 страниц), Руководство по установке (18 страниц), Матрица поддержки (17 страниц), Функциональное руководство (15 страниц)

Verifying Storage Array Discovery

The Automatic Discovery option automatically discovers both in-band and out-

of-band arrays and adds the storage arrays to the management domain. If the out-

of-band or in-band connections shown on the summary page are not accurate,

complete the following steps. For more information, see the online help.

1 Check the hardware and connections for possible problems. For specific

procedures on troubleshooting interface problems, see the Owner's Manual

at support.dell.com/manuals.

2 Verify that the array is on the local subnetwork. If it is not, click the new

link to manually add it.

3 Verify that the status of each storage array is Optimal. If any array shows

an Unresponsive status, complete one of the following steps:

To remove the array from the management domain, highlight the

array and then click Remove link.

To add an array, click New link.

In Linux, click the Manual button and click OK.

4 If the array still shows an Unresponsive status, contact Dell.

1 The name of the first storage array found appears in the Devices tab of the

EMW. To see a list of all storage arrays found on the local network, expand

the discovered storage arrays tab in the device pane of the EMW.

2 The default name for a newly installed MD3600f series storage array is

Unnamed. If another name appears in MDSM, click the down arrow next

to the name and click Unnamed in the drop-down list.

3 Double-click on the discovered array to launch the array management

window and make changes to the configuration of the array.

4 Click Perform Initial Setup Tasks to see an outline and links to the

remaining post-installation tasks. The array is now ready to be configured.

See the Owner's Manual for information about each task and to perform

the necessary configuration steps. Table 4-1 lists the recommended

configuration steps that can be accomplished using the Owner's Manual.

Post Installation Tasks