Dell Force10 S4810 Manuel de démarrage rapide - Page 21
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Dell Force10 S4810. Dell Force10 S4810 27 pages. Dell force10 s4810 switch
Également pour Dell Force10 S4810 : Manuel de déploiement (36 pages), Manuel de configuration (17 pages), Manuel de configuration (17 pages)
Imprimer la page
Configure the Enable Password
Access the EXEC Privilege mode using the enable command. The EXEC
Privilege mode is unrestricted by default. Configure a password as a basic
security measure. There are two types of enable passwords:
•
enable password stores the password in the running/startup configuration
using a DES encryption method.
•
enable secret is stored in the running/startup configuration in using a
stronger, MD5 encryption method.
Dell Force10 recommends using the enable secret password.
Task
Create a password to
access EXEC
Privilege mode.
Create a Port-based VLAN
The Default VLAN as VLAN 1 is part of the system startup configuration and
does not require configuration. To configure a port-based VLAN, you must
create the VLAN and then add physical interfaces or port channel (LAG)
interfaces to the VLAN.
Task
Configure a port-based VLAN (if the
vlan-id is different from the Default
VLAN ID) and enter INTERFACE
VLAN mode. After you create a
VLAN, you must assign interfaces in
Layer 2 mode to the VLAN to activate
the VLAN.
Use the show vlan command in the EXEC Privilege mode to view the
configured VLANs.
Command Syntax
enable [password | secret] [level level]
[encryption-type] password
Command Syntax
interface vlan vlan-id
Command Mode
CONFIGURATION
Command Mode
CONFIGURATION
Installing the Software
17