Dell Force10 S60 Series Manuel - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Dell Force10 S60 Series. Dell Force10 S60 Series 45 pages.
Également pour Dell Force10 S60 Series : Manuel de démarrage rapide (29 pages)

Imprimer la page
Dell Force10 S60 Series Manuel
The PWR Light Emitting Diode (LED) blinks until the boot-up sequence is complete. When the boot up
is complete, the PWD LED is steadily lit.
The Stack ID LED displays a digit to show the position of the unit in a stacking chain. For a single
chassis, a 0 displays.

AC Power

Connect the plug to each AC receptacle
As soon as the cable is connected between the S60 system and the power source, the system is
powered-up; there is no on/off switch.
Figure 3-7. AC Power Connection

DC Power

To connect DC power
Step
Task
Remove the small plastic cover from the DC connectors.
1
Attach the connectors to both the DC PSUs at the rear of the S60 system. Ensure the connection is secure.
2
Replace the plastic cover over the DC connectors.
3
Turn the power switch on.
4
Figure 3-8. DC power connection
(Figure
(Figure
3-8), follow these steps:
3-7). Ensure the power cord is secure.
Install the S60 System
|
20