Miller XMS 403 Manuel du propriétaire - Page 28

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Miller XMS 403. Miller XMS 403 44 pages. 400 volts ce arc welding power source

Imprimer la page

4-13. Selecting Synergic MIG Welding

Set Synergic MIG welding process using

P3 push button.

In Synergic MIG mode, the operator may

need to adjust welding data (wire type, wire

diameter, and gas type) and only one weld

parameter. Generally, wire feed speed is

adjusted and the synergic process auto-

matically sets appropriate weld voltage.

Synergic welding also sets many secon-

dary welding parameters automatically for

improved weld quality.

D1 value is default voltage setting (range is

OM-244 243 Page 24

defined by wire type, wire diameter and gas

type selection).

D2 value is the default current setting

(range is defined by wire type, wire diame-

ter and gas type selection).

During Synergic MIG Welding:

D1 value is Measured Welding Voltage in

Volts.

D2 value is Measured Welding Amperage

in Amperes.

See Wire Feeder manual for all remaining

Synergic MIG settings.

Select wire type using P4 push button.

Select wire diameter using P5 push button.

Select gas using P6 push button.

Select trigger mode using P7 push button.

See Wire Feeder manual for remaining

Synergic MIG settings.

Setting Cooler Status (see Section 4-3 )

To prevent damage to water-cooled

torch and components, be sure that

coolant is turned on.

Ref. 956142645-5-5