Panasonic WV-NF284 - i-Pro Network Camera Manuel d'installation - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Panasonic WV-NF284 - i-Pro Network Camera. Panasonic WV-NF284 - i-Pro Network Camera 36 pages. Ip video cameras
Également pour Panasonic WV-NF284 - i-Pro Network Camera : Spécifications (2 pages), Brochure (2 pages), Référence (2 pages), Référence (2 pages), Tableau de comparaison (6 pages), Spécifications (2 pages), Spécifications (2 pages), Note d'intégration (8 pages)

Imprimer la page

Panasonic WV-NF284 - i-Pro Network Camera Manuel d'installation

!9 INITIAL SET button

Use this button to reset the settings of

the camera to the default settings.

Turn off the power of the camera. Then,

turn on the power of the camera while

holding down this button and wait around

5 seconds without releasing this button.

Wait around 30 seconds after releasing

the button. The camera will restart and

the settings including the network and

the date/time settings will be initialized.

@0 Network connector

Connect a LAN cable (category 5) to this

connector. ( page 22)

@1 Safety wire holder

Attach the safety wire fixed with the cam-

era mount bracket to the holder. Make

sure that the safety wire is securely

hooked on the safety wire holder when

adjusting or installing the camera.

( page 18)

I Camera mount bracket

@2 Safety wire

Attach this wire to the safety wire holder

of the camera. Make sure that the safety

wire is securely hooked on the safety

wire holder when adjusting or installing

the camera. ( page 18)