Panasonic WV-NF284 - i-Pro Network Camera 설치 매뉴얼 - 페이지 15

{카테고리_이름} Panasonic WV-NF284 - i-Pro Network Camera에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WV-NF284 - i-Pro Network Camera 36 페이지. Ip video cameras
Panasonic WV-NF284 - i-Pro Network Camera에 대해서도 마찬가지입니다: 사양 (2 페이지), 브로셔 (2 페이지), 참조 (2 페이지), 참조 (2 페이지), 비교 차트 (6 페이지), 사양 (2 페이지), 사양 (2 페이지), 통합 참고 사항 (8 페이지)

페이지 인쇄
Panasonic WV-NF284 - i-Pro Network Camera 설치 매뉴얼
!9 INITIAL SET button
Use this button to reset the settings of
the camera to the default settings.
Turn off the power of the camera. Then,
turn on the power of the camera while
holding down this button and wait around
5 seconds without releasing this button.
Wait around 30 seconds after releasing
the button. The camera will restart and
the settings including the network and
the date/time settings will be initialized.
@0 Network connector
Connect a LAN cable (category 5) to this
connector. ( page 22)
@1 Safety wire holder
Attach the safety wire fixed with the cam-
era mount bracket to the holder. Make
sure that the safety wire is securely
hooked on the safety wire holder when
adjusting or installing the camera.
( page 18)
I Camera mount bracket
@2 Safety wire
Attach this wire to the safety wire holder
of the camera. Make sure that the safety
wire is securely hooked on the safety
wire holder when adjusting or installing
the camera. ( page 18)
15