DIEBOLD HSK-100 Manuel de l'utilisateur - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DIEBOLD HSK-100. DIEBOLD HSK-100 14 pages. Cam angle gauge
Également pour DIEBOLD HSK-100 : Manuel de l'utilisateur (16 pages)

Imprimer la page

Spannschulter-Messgerät /

Cam Angle Gauge

HSK 25 - HSK 100

Indicator

7.1.

Disassembling

When the indicator needs to be replaced, remove the adjustment stop screw (sealed

when new) and remove the indicator. Remove the probe and bolt it into the new

indicator.

7.2.

Installation

Install the indicator with the probe installed into the bore and give the indicator a

preload of 2,5 mm. Clamp indicator in this position. Check the function and repeatability

of the indicator.

Attention!

Do not block the indicator by over-tightening.

After replacement, the adjustment of the indicator must be checked with the master

taper (see section Gauge setting)

Spannschulter-Messgerät_D+E

Seite 13 von 14