DIEBOLD HSK-100 사용자 설명서 - 페이지 13
{카테고리_이름} DIEBOLD HSK-100에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DIEBOLD HSK-100 14 페이지. Cam angle gauge
DIEBOLD HSK-100에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)
페이지 인쇄
Spannschulter-Messgerät /
Cam Angle Gauge
HSK 25 - HSK 100
7.
Indicator
7.1.
Disassembling
When the indicator needs to be replaced, remove the adjustment stop screw (sealed
when new) and remove the indicator. Remove the probe and bolt it into the new
indicator.
7.2.
Installation
Install the indicator with the probe installed into the bore and give the indicator a
preload of 2,5 mm. Clamp indicator in this position. Check the function and repeatability
of the indicator.
Attention!
Do not block the indicator by over-tightening.
After replacement, the adjustment of the indicator must be checked with the master
taper (see section Gauge setting)
Spannschulter-Messgerät_D+E
Copyright © Diebold 2012-12 Ersteller: kh
Seite 13 von 14