DIEBOLD HSK-100 Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DIEBOLD HSK-100. DIEBOLD HSK-100 14 pagina's. Cam angle gauge
Ook voor DIEBOLD HSK-100: Gebruikershandleiding (16 pagina's)

Pagina afdrukken

Spannschulter-Messgerät /

Cam Angle Gauge

HSK 25 - HSK 100

Indicator

7.1.

Disassembling

When the indicator needs to be replaced, remove the adjustment stop screw (sealed

when new) and remove the indicator. Remove the probe and bolt it into the new

indicator.

7.2.

Installation

Install the indicator with the probe installed into the bore and give the indicator a

preload of 2,5 mm. Clamp indicator in this position. Check the function and repeatability

of the indicator.

Attention!

Do not block the indicator by over-tightening.

After replacement, the adjustment of the indicator must be checked with the master

taper (see section Gauge setting)

Spannschulter-Messgerät_D+E

Seite 13 von 14