Olympus BH2 Series Démontage, nettoyage et remontage - Page 20
Parcourez en ligne ou téléchargez le pdf Démontage, nettoyage et remontage pour {nom_de_la_catégorie} Olympus BH2 Series. Olympus BH2 Series 45 pages. Phase contrast
Également pour Olympus BH2 Series : Manuel de dépannage et de réglage (46 pages), Démontage, nettoyage et remontage complets (23 pages), Démontage, nettoyage et remontage complets (40 pages), Manuel (6 pages), Manuel d'installation (9 pages)
Imprimer la page
Using a cotton swab and a suitable solvent (acetone),
thoroughly clean the mating surface of the nosepiece
locking block, where it slides on the mount base (see
Figure
62).
Figure 62 – Clean the nosepiece locking block
Use a suitable solvent (acetone) to clean any grease or
contaminants from the threads of the nosepiece locking
thumbscrew (see
Figure
Figure 63 – Clean threads of the locking thumbscrew
Reassemble the New-Style Slide Mount (BHS/BHT)
Position the nosepiece locking block beneath the
nosepiece slide-mount base, making sure the bearing
surface of the locking block is in contact with the mount
base (see
Figure
64).
Figure 64 – Position locking block under slide-mount base
Teardown, Cleaning, and Reassembly of the Miscellaneous Parts of the Olympus BH-2 Microscope Frames
63).
Align the pivot-screw hole in the nosepiece slide-mount
base with the tapped hole in the nosepiece locking
block and use a suitable slotted screwdriver to reinstall
the pivot screw (see
Figure
Figure 65 – Reinstall the locking-block pivot screw
Align the stop-screw hole in the nosepiece slide-mount
base with the tapped hole in the nosepiece locking
block and use a suitable slotted screwdriver to reinstall
the stop screw (see
Figure
Figure 66 – Reinstall the locking-block stop screw
The newer style nosepiece slide mount is now ready to
be reinstalled into the stand and put back into service
(see
Figure
67).
Figure 67 – Slide-mount parts ready for use (new style)
65).
66).
Revision 1
Page 20 of 45