Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 17 pages. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Également pour Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion : Note d'installation (14 pages), Manuel de solution (17 pages), Note d'installation (46 pages), Livre blanc (19 pages), Description (1 pages), Bulletin d'information sur les produits (6 pages), Avis (4 pages), Fiche technique (9 pages), Fiche technique (18 pages), Livre blanc (18 pages), Manuel de configuration (8 pages), Note d'installation (28 pages), Manuel de dépannage (11 pages), Note d'installation (18 pages), Note d'installation (24 pages), Manuel (19 pages), Note d'installation (36 pages)

OSPF Convergence with Default timers

Recommendations

•

Enable atleast two links in VSL.

•

Use MEC with ePAgP or MEC with VSLP Fast Hello for faster VSL link loss convergence results.

•

Enable ECMP with IP−BFD.

•

Enable ePAgP to core, if the access layer is not ePAgP capable.

•

Enable both ePAgP an direct heart beat link based VSLP Fast Hello methods, if possible.

•

During VSL loss and recovery process do not perform configuration changes.

♦

After atleast one VSL member link is restored, if configuration on old ACTIVE chassis is

unchanged, old ACTIVE reboots itself to boot in VSS hot−standby redundancy state.

*Apr 6 17:36:33:809: %VSLP−SW1_SP−5−VSL_UP: Ready for Role Resolution with

Switch=2, MAC=0013a.30e1.6800 over Te1/5/5

*Apr 6 17:36:36.109: %dualACTIVE−1−VSL_RECOVERED: VSL has recovered during

dual ACTIVE situation: Reloading switch 1

!−−− part of output truncated