Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Kullanıcı Kılavuzu - Sayfa 10

Anahtar Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 17 sayfaları. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Ayrıca Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion için: Kurulum Notu (14 sayfalar), Çözüm Kılavuzu (17 sayfalar), Kurulum Notu (46 sayfalar), Beyaz Kitap (19 sayfalar), Açıklama (1 sayfalar), Ürün Bülteni (6 sayfalar), Uyarı (4 sayfalar), Veri Sayfası (9 sayfalar), Veri Sayfası (18 sayfalar), Beyaz Kitap (18 sayfalar), Yapılandırma Kılavuzu (8 sayfalar), Kurulum Notu (28 sayfalar), Sorun Giderme Kılavuzu (11 sayfalar), Kurulum Notu (18 sayfalar), Kurulum Notu (24 sayfalar), Manuel (19 sayfalar), Kurulum Notu (36 sayfalar)

OSPF Convergence with Default timers

Recommendations

•

Enable atleast two links in VSL.

•

Use MEC with ePAgP or MEC with VSLP Fast Hello for faster VSL link loss convergence results.

•

Enable ECMP with IP−BFD.

•

Enable ePAgP to core, if the access layer is not ePAgP capable.

•

Enable both ePAgP an direct heart beat link based VSLP Fast Hello methods, if possible.

•

During VSL loss and recovery process do not perform configuration changes.

♦

After atleast one VSL member link is restored, if configuration on old ACTIVE chassis is

unchanged, old ACTIVE reboots itself to boot in VSS hot−standby redundancy state.

*Apr 6 17:36:33:809: %VSLP−SW1_SP−5−VSL_UP: Ready for Role Resolution with

Switch=2, MAC=0013a.30e1.6800 over Te1/5/5

*Apr 6 17:36:36.109: %dualACTIVE−1−VSL_RECOVERED: VSL has recovered during

dual ACTIVE situation: Reloading switch 1

!−−− part of output truncated