Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion User Manual - Page 10

Browse online or download pdf User Manual for Switch Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 17 pages. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Also for Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Installation Note (14 pages), Solution Manual (17 pages), Installation Note (46 pages), White Paper (19 pages), Description (1 pages), Product Bulletin (6 pages), Notice (4 pages), Datasheet (9 pages), Datasheet (18 pages), White Paper (18 pages), Configuration Manual (8 pages), Installation Note (28 pages), Troubleshooting Manual (11 pages), Installation Note (18 pages), Installation Note (24 pages), Manual (19 pages), Installation Note (36 pages)

Print Page
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion User Manual
OSPF Convergence with Default timers
Recommendations
•
Enable atleast two links in VSL.
•
Use MEC with ePAgP or MEC with VSLP Fast Hello for faster VSL link loss convergence results.
•
Enable ECMP with IP−BFD.
•
Enable ePAgP to core, if the access layer is not ePAgP capable.
•
Enable both ePAgP an direct heart beat link based VSLP Fast Hello methods, if possible.
•
During VSL loss and recovery process do not perform configuration changes.
♦
After atleast one VSL member link is restored, if configuration on old ACTIVE chassis is
unchanged, old ACTIVE reboots itself to boot in VSS hot−standby redundancy state.
*Apr 6 17:36:33:809: %VSLP−SW1_SP−5−VSL_UP: Ready for Role Resolution with
Switch=2, MAC=0013a.30e1.6800 over Te1/5/5
*Apr 6 17:36:36.109: %dualACTIVE−1−VSL_RECOVERED: VSL has recovered during
dual ACTIVE situation: Reloading switch 1
!−−− part of output truncated