Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Note d'installation - Page 20

Parcourez en ligne ou téléchargez le pdf Note d'installation pour {nom_de_la_catégorie} Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 36 pages. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Également pour Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion : Note d'installation (14 pages), Manuel de solution (17 pages), Note d'installation (46 pages), Livre blanc (19 pages), Description (1 pages), Bulletin d'information sur les produits (6 pages), Avis (4 pages), Fiche technique (9 pages), Fiche technique (18 pages), Livre blanc (18 pages), Manuel de configuration (8 pages), Note d'installation (28 pages), Manuel de dépannage (11 pages), Note d'installation (18 pages), Manuel de l'utilisateur (17 pages), Note d'installation (24 pages), Manuel (19 pages)

Removing a DFC4 Daughter Card

Partially reinstall a cap nut, rotating it about 3 turns so that there is a space of about 1/8 inch (3 mm)

Step 5

between the bottom of the cap nut and the top of the DFC4 daughter card, as shown in

cap nut acts as a stop when you unseat the daughter card connector so that the DFC4 daughter card does

not move horizontally and cause damage to the Ethernet module.

Figure 10

Appx 1/8 inch

With your left hand, lift slightly at the location shown in

Step 6

rock the DFC4 daughter card up and down with your right hand, no more than half an inch in either

direction, to unseat the DFC4 daughter card from the module.

Catalyst 6500 Series Distributed Forwarding Card 4 for WS-X68xx, WS-X69xx, and Select WS-X67xx Modules Installation Note

Partially Installing the Cap Nut

Cap nut

Figure

11. While lifting with your left hand,

Figure

10. The

OL-24918-02